Power Commander

Dynojet Sled Products


Written by:

Hello and Greetings from Dynojet! It’s been a busy season for us in the engineering building and we have a plethora of new/improved offerings to showcase for the 2014-2015 season.


First up and brand new from Dynojet is the POD-300. This product replaces our LCD-200 and has been fitted into a platform to satisfy the needs of us hard-core sledders. We’ve kept all the cool stuff such as real time gauges, In-Field fuel trims to the Low, Mid, and Hi regions of the map, and Datalogging, but we’ve made this display visible in direct sunlight, removed the color touch screen, added programmable warning lights, and best of all – made this thing weatherproof to withstand each and every day of winter time use. Weatherproofing also meant altering the cable connection – and we’ve swapped to a robust, overmolded CAN connector to provide a solid click fit. Oh – and this little gem retails for an even lower price of $249.

Arctic Cat:

The Thief River Cat guys just keep on trucking strong every year. Whether it’s the powerhouse Suzuki powered 800cc twin, or the new 1049cc Genesis triple stuffed under the hood, Arctic Cat machines produce great power and customers are continually purchasing – thus we are building Power Commanders for their sleds all winter long. New for this season is the revamped PCV-CDI version 2.0 for the 800cc/1000cc twins. A long hard look at production board houses and component placement has taught us a thing or two, and prompted us to rework this circuit board to create a wickedly useable, tunable, and accurate new version. The new unit will look entirely the same, but the harness and circuit board are completely different. Kit builders found this fuel + timing control to be a huge benefit last year, and this season will only get better. Enjoy the ability to subtract -100% fuel or add 250% fuel AND have +- 25* of timing with these….Whoooo are they cool and produce an even stouter running sled to shred some snow with your buddies. The part number for this new module is 11-013 and fits all 2007-2015 Arctic Cat 800/1000cc twins. The standard fuel-only PCV is number 11-004 for those same 2007-2015 Arctic Cats.

That 3-cylinder 4-stroke 7000 series sled as has a PCV offered for it too – even a boost ready version to fuel your turbo J which we all love to do. Check into the 11-015 for a fuel-only solution or the 11-015-PTI to fuel your turbo.

And we will never forget about the 9000 series / 1100 turbo sleds as they sure are a giggle to ride. Our product line for these monsters consists of three lovely products in the Power Commander V, Ignition Module, and CMD. Solely the 11-009 PCV with provide you with fueling control for bolt on mods like the downpipe and intake. We also stub out a pre-configured wire to tap into the MAP sensor if you’d like to create boost tables. Pairing the PCV with the Ignition Module 6-91 gives you control of fueling and timing allows you to alter spark events based on TP/RPM or you based on boost pressure, and even employ the launch control feature and raise your Rev Limiter! This is a highly useable setup. Or, opt for our CMD (Combustion Management Device) CMD-1911 to control fuel and the actual boost pressure the engine develops. This device was wildly popular with the Z1 turbo machines and is still a large player in the 1100T days now. All of these DJ devices are compatible with CAN accessories such as the Autotune or our new POD-300 which has replaced the LCD-200. All numbers referenced are applicable to the 2012-2015 1100cc Turbocharged twins.


Boy, are we loving the enthusiasm that customers devote to their Polaris machine to make it run at the peak of its ability. This season, we have 3 …. that’s right THREE new products to offer for the Polaris riders.

First in the new line from Dynojet is the Power Commander Fuel Controller or PCFC. This bare bones unit keeps all of the tuning ability of the PCV (and accepts Power Commander Maps), but we cropped out the accessory-ability in this lower price point unit. How much lower?? It has an MSRP of $249…yep. You get everything you want in a plug-n-play fuel controller to go ride knowing the map is tuned for your exact machine and will run just how you want– for $249 under part number FC19004 for all 2010-2015 Polaris 600/800cc CFI2 machines AND the FC19007 will work for your 2007-2014 CFI4 machine. Whether you have a CFI4, or a CFI2, or even the new AXYS machine, we have a PCFC for you. The AXYS falls under FC19031. All of these models are available RIGHT NOW.

That leads us into the offering for the AXYS sled. As mentioned, we will have a PCFC for the AXYS, but we are also offering a PCV. Keep all the great tunability of a fuel map with 10 Throttle positions, 250RPM precision, store 2 maps changeable on the fly, and have the option to add the POD-300, or the Autotune Device to monitor your AFR and tune your machine automatically as you ride. This PCV version is also currently available as the 19-004 for CFI2’s, or 19-007 for the CFI4, or 19-031 for the new and exciting AXYS.

We won’t stop there though…. With our worthwhile and extremely successful Revision to our PCV-CDI units, we made the new setup versatile enough to provide a Fuel AND Ignition controller to you Polaris riders as well. That’s right – Fuel and Timing control in one box – just like you’ve wanted. After personally riding prototype units late into the spring for hard, hands-on field testing, these new devices expose some massive potential in this 800cc mill. I can only imagine what happens when a set of ported jugs are installed on the bottom end, or an altered expansion chamber geometry to really reap the massive benefits of adjusting the ignition timing! Very, VERY Cool. This new product will trickle in this season numbered as 19-030 for the CFI2’s, and 19-032 for the AXYS as a present for you to help celebrate the New Year J


We really love these Bombardier sleds. The quality that the BRP team puts into these buggies is phenomenal, and we continue to enjoy the ETec engine. While the ETec PCV has worked exactly as it should providing users with the fuel addition they need, for this year we focused on making the PCV for the ETec as good as it ever could be. Some little changes here and there in the raw background operations to accommodate this exotic piggyback system has greatly increased the stability of how this package comes together. Be sure to update your Power Commander unit to our newest version of firmware 1.13.1 to benefit from these improvements. The XM/XS chassis machines utilize the 25-017, while the elder XP employs the 25-015.

And we can never forget about the omni-present 1200cc triple. This engine is a stout platform to work with and each year we sell more and more PCV’s for this sled as 25-002 for fuel only, and 25-002-PTI for the boosted boys. This was another application where our low Price-point PCFC numbered as FC25002 found a perfect niche.


The boys in Blue are ramping up their model lineup and storming back into the market with great offerings from trails sleds through mountain monsters. As a factory sponsor of the race team these past 3 years, our relationship and ability to develop products for Yamaha machines has been wildly successful. XC racers or RMSHA hillclimb members are fueling their machines with Dynojet Power Commanders showcasing our company well with Podium finishes throughout the racing season. PCV, Autotune, and even the datalogging in LCD-200 has provided well tuned buggies.

We continue to offer the PCV for the Apex, Nytro, Phazer, and Viper, all of these come in boost ready versions to fuel your turbocharged ride. Controlling ignition timing is possible on the 2012 and older years of the Apex, and all years of the Nytro or Phazer – by pairing these together you can raise your rev limiter or even utilize the launch control feature. But it wasn’t enough to just leave our product lineup the same this year for this brand either – so all of the sleds can also opt for the PCFC as well! All Viper’s use the 22-057 or opt for the 22-057-PTI to fuel for boost. The Apex’s newer than 2012 require the 22-038 while older than 2012 fall under the 22-024. Boost-ready units are ready for these as well. The older year range of Apex’s allow the 6-111 IMV to be installed. ALL Nytro machines use the 22-025 or the 22-025-PTI to fuel for boost, and ALL can use the 6-110 IMV. Phazers newer than 2008 have the benefit of fuel+ignition in one box as 22-052. Slap a PTI on that as well for Fuel+Timing+Boost in one box and that machine transforms into a lightweight hoot to ride.

Continue reading

VIDEO: Dynojet Stunt Bike Tuning


Written by:

Check out this really cool video of Nick “Apex” Brocha and Ernie “EDUB” Vigil as they give you the 411 on the benefits of installing a Power Commander V on your motorcycle. Extra horsepower, snappy throttles and smoky tires.

Continue reading

’13-’14 KTM 690 Duke PCV Now Available


Written by:

The Power Commander V with fuel and ignition control is now available for the 2013-2014 KTM 690 Duke. Watch this video to learn how to install a Power Commander V on your 2013-2014 KTM 690 Duke.

Continue reading

Power Commander V now available for the 2014 Honda Grom


Written by:

The Power Commander V for the 2014 Honda Grom is now available! This is a fuel and ignition unit that plugs in-line of the stock ECU and wiring harness for easy installation. You can also raise the rev limit if desired!

2014 Honda Grom

Continue reading



Written by:

After 3 consecutive WERA National Endurance overall titles in 2011 to 2013, BEi Racing / Dunlop Development will be facing a new challenge in 2014 competing in the new U.S. National Endurance Series presented by Lucas Oil. This new series is a joint effort by WERA and CMRA designed to continue the history of endurance racing in the US as well as bring more competition to the track. For the first round the team will head west to Texas World Speedway in College Station, TX over the March 22nd – 23rd weekend for the “8 hours of Texas Endurance Race” hosted by CMRA.

Tim Bemisderfer, who has ridden for BEi in all 3 of their championships will return to the team along with team owner / rider Billy Ethridge. To strengthen the team for 2014, Sean Dwyer and Dustin Dominguez will also be joining the squad. This will help especially with the first race being an 8-hour and being able to have a fast and fresh rider on the bike during all of the stints.7df2b09f-afd9-4379-8255-332e89751b9d

For 2014 BEi Racing / Dunlop Development will continue competing with their proven Suzuki GSX-R 1000’s rolling on US made Dunlop slicks. Vesrah USA / MCJ Motorsports will be providing both stopping power with Vesrah brake pads as well as driving force with MCJ Motorsports endurance spec engines using Yoshimura products. Thermosman will be handling the suspension including utilizing JRi shocks. Long time team sponsors Spiegler Brake Lines, Pit Bull, RK Racing Chain, Super Signs, American Supercamp, Dynojet, Dion Device and Chicken Hawk are all continuing with their support of the team. Arai Helmets, Vanson Leathers, Sidi Boots and Motonation will be outfitting Billy Ethridge.


Billy Ethridge – BEi Racing / Dunlop Development team owner:

“I’m looking forward to the challenge of competing against the Texas based teams of the CMRA in this new series and hoping to continue with our success and being able to keep our patriotic # 1 on the bike. I have to thank Dunlop for their continued support, especially Tony Romo for coming to the track, providing guidance and helping with our pit stops. The addition of Sean and Dustin in combination with Tim returning should prove to be a formidable effort.”


BEi Racing / Dunlop Development would like to thank their sponsors for the 2014 season: Dunlop Tires, Suzuki, Vesrah Brakes, MCJ Motorsports, Thermosman Suspension, Spiegler Brake lines, Arai Helmets, Vanson Leathers, Sidi Boots, Yoshimura, JRi Shocks, Motonation, Pit Bull, RK Racing Chain, Super Signs, American Supercamp, DYNOJET, Dion Device and Chicken Hawk Racing.USNE


Continue reading

Dynojet Sponsored Rider Danny Eslick Wins the Daytona 200


Written by:

Danny Eslick kicked off the 2014 AMA Pro Road Racing season winning the 73rd Daytona 200. We had six Dynojet sponsored teams finish in the top 10.  Danny Eslick finished on top and Jake Lewis finished 3rd. Bobby Fong finished 4th,  Kyle Wyman 6th, Jake Zemke 8th and Steve Rapp 10th. |Photos by Brian J. Nelson|

Daytona 200 Top 10

Continue reading

Dynojet at Daytona Bike Week!


Written by:

Daytona Bike Week starts Friday March 3rd! Our dyno truck will be there offering our services to anyone with Dynojet product! We are located outside the Daytona International Speedway in the Midway off Turn 4. See you there!!!


Continue reading

Video: 2014 Suzuki GW250 PCV Install


Written by:

In this video we install a Power Commander 5 with fuel and ignition on a 2014 Suzuki GW250.

Continue reading

Video: PCFC Software Install Map Install


Written by:

In this video we download and install the PCFC software from the Dynojet website. We then download Power Commander maps and send one to our PCFC.

Continue reading

NEW RELEASE: Power Commander FC


Written by:

The Power Commander FC is a new plug-n-play fuel management device pre-programmed with make/model specific maps. In addition the Power Commander FC has the added ability to modify or change these maps on the fly without a computer.

Users can literally select between a Power Commander FC Map, custom built maps, or even fine tune low, mid or high RPM ranges while sitting on the bike and without plugging into a computer. Standard +/- 10% increments from selected map settings, different ranges are available using the supplied Control Center Software.


Users can also load up to 10 of their personally built Power Maps into the Power Commander FC and select between them while in the saddle- eliminating the need to “re-boot” with the computer every time a new map is desired.

Continue reading