Congrats to Jordan Carlsson on Australian Supersport Championship Round 4


Written by:


“The Hyperion Motorsports/Graves Yamaha Team can report that Supersport rider, Jordan Carlsson, has regained a close 4th overall in the Australian Supersport Championship, following Round 4 of the Australian Superbike Championship, at Hidden Valley Raceway, Darwin, at the weekend. It is a positive step for the team, as the season enters its second half, with three rounds now remaining, however, it wasn’t without complications. Carlsson displayed pure persistence and determination during both 14 lap races in the heat of the Darwin sun, following a qualifying result that left much room for improvement, by both team, and rider, due largely to a lack of circuit knowledge, having never been to Hidden Valley before.” Read the full press release at

“To be honest we struggled a lot to find a setting that allowed us to push for a lap time to give us a good starting position” Jordan explains. “We had our work cut out for us there as a lot of the guys competed at the Three-Hour endurance race the week prior, and that gave them an advantage right from FP1. We found the pace we needed, but much alter than we would’ve liked to. That is something we need to actively work on, and I look forward to the official ASBK Test ahead of Round 5, as qualifying has been our weak point in the last two rounds in particular. We’ve had good race pace, but it is just so critical to qualify well with this format of racing, as it allows me to manage the tyre a lot better towards the end of the race and push for race wins in order to bank maximum points for the championship” he says.


Qualifying: 13th
Lap Time: 1:09:991
Pole Time:1:09:153
Top Speed: 267km/h
Lap Record: 1:09:458



Keep up the good racing Jordan #45.

Continue reading

Power Commander V New Release: 2017 Yamaha R1


Written by:


The Power Commander V for the 2017 Yamaha R1 has the most features and highest resolution maps of any fuel tuner.

Whether you are on the road or getting ready for track days, the Power Commander V for the all new 2017 R1 is ready.  The Power Commander V attaches to the gear position sensor to give a more refined fuel curve. 

Part #: 22-069 (Fuel Only)
Fits: 2015-2017 Yamaha R1

Power Commander V with Ignition Module




Danny Eslick and Mathew Scholtz are two of the top MotoAmerica guys taking advantage of the Power Commander V on the all new 2017 Yamaha R1. 


#69 Danny Eslick TOBC Racing – MotoAmerica Motul Superbike Class


#11 Mathew Scholtz Yamalube/Westby Racing – MotoAmerica Motul Superbike



Continue reading

Speedys Motorcycles Build and Dyno Run: 2013 Ducati Diavel


Written by:

Speedys Motorcycle Shop came by Dynojet all the way from Brisbane. We got a chance to ask them about their recent 2013 Ducati Diavel build.


How did the bike feel to the customer after the mods?

“Fast! Still scares the sh^t out of me…”

What was the most difficult part of the build?

The hardest part of the build was making the turbo removable back to a standard bike should it ever need doing. Also due to room we contacted our fabricator and good friend Craig from Extreme Custom Engineering. He designed the plenum and pipe work based on our requirements. This bike has been so popular we have been receiving calls from Asia and the USA inquiring about this bike.

We also added;
Garrett GT28 turbo
Turbo Smart BOV
Bosch 3 Bar map sensor
VDO drain back pump.
Endless amounts of Aeroflow fittings.
Custom loom for pump – all Milspec TEFL
Power Commander V
Ported the injectors to increase volume by 44%
Modified fuel pump.

We custom mapped this on our Dynojet 250 RT. The process like with anything Dynojet is easy and flawless. The solid build on the 250RT along with PowerCore means that any boosted bike is a pleasure and simple tune.ducati-diavel-run

Continue reading

VIDEO: Dynojet Stunt Bike Tuning


Written by:

Check out this really cool video of Nick “Apex” Brocha and Ernie “EDUB” Vigil as they give you the 411 on the benefits of installing a Power Commander V on your motorcycle. Extra horsepower, snappy throttles and smoky tires.

Continue reading

VIDEO: 2014 Yamaha FZ-09 PCV Install


Written by:

In this video we install a Power Commander V with fuel only control on a 2014 Yamaha FZ-09.

Continue reading

Video: Honda Grom Quick Shifter


Written by:

NOW AVAILABLE! The Dynojet quick shifter is now available for your Honda Grom. Make clutchless shifts at wide open throttle. Check out the video for a demonstration!


Continue reading

’13-’14 KTM 690 Duke PCV Now Available


Written by:

The Power Commander V with fuel and ignition control is now available for the 2013-2014 KTM 690 Duke. Watch this video to learn how to install a Power Commander V on your 2013-2014 KTM 690 Duke.

Continue reading

The Max Grundy Ducati Monster M796


Written by:

We recently sponsored a very special build for the SEMA 2013 Show. This custom built Ducati Monster, built by Trenton Ulicny, was a big hit at the SEMA show! It was vinyl wrapped with the amazing artist Max Grundy’s art work. It was placed at the front entrance of the SEMA show where more than 50,000 peopled stopped, gawked and photographed this great bike. This Power Commander V equipped Ducati not only looks good, but is tuned to perfection as well. Keep an eye for this bike in upcoming magazines. Check out the images below and check out the bike for yourself.blog3mmmmmSEMA_Ducati2blog1



Continue reading

Videos: Quickshifter Types and Troubleshooting


Written by:

In this video we introduce and describe the various types of Quickshifter shift sensor/switches that we have available. Generally, we list the appropriate shift sensor/switch on our website for your bike model and for an otherwise stock shift linkage. However when using aftermarket rearsets and/or changing your shift pattern to GP (reversed) shifting, you likely will need something different. This video should help you decide specifically what is appropriate for your specific bike.

In this video we troubleshoot a shift rod pressure sensor on the bike.

Continue reading

2012 MV Agusta F4 1000 PCV Install Video


Written by:

In this video we install a Power Commander V and a Secondary Fuel Module on a 2012 MV Agusta F4 1000.

Continue reading